| Sequencer Circuit Board
Part Number (Replaces this P/N) |
Compatible Genie Garage Door Operator Model
Numbers |
Opener Type |
NOTES |
| 24350S (20121R) |
CM, PRO, SD, G, LD, LAD, PPD, 6000A, 80, 70, 60, 550, 100,
550A, 100A, BlueMax without Safe-T-Beam Sensors* |
Screw Drive |
Compatible with ALL Screw Drive openers up to 1993 |
| 31181R |
PMX60, PMX65, PMX70, PMX75, PMX80, PMX85, 300-IC, 500-IC, IC-250* |
Chain Drive |
Compatible with ALL 1997-up Genie Intellicode Chain Drive openers |
| 31184R (20386R) |
PRO95, CM8600, CM7600, IS550* |
Screw Drive |
Compatible with ALL 1997-up Genie Intellicode Screw Drive openers |
| 20380R (33001R or 34374R) |
PMX500-IC/B, PMX300-IC/B, IC250/B, PMLD500, PDG400, PCG400, PCG450, PCG650,
GCG350, GCG350L, PCG600, PCG650* |
Chain Drive |
Intellicode receiver board with "learn" button and 3 adjustment knobs |
| 20384R (27504R) |
PRO 83/88/90/93/98 (90 and 98 date codes 3189 and later), CM7500/8500,
SD Series, G Series (for -S models), BlueMax WITH Safe-T-Beam Sensors* |
Screw Drive |
|
| 25648R (20285R) |
Compatible with ALL Genie Garage Door Openers with an Internal 12-Dip
Switch Receiver |
|
|
| 20437R.S |
Compatible with ALL Genie Garage Door Openers with an Internal Intellicode
Receiver |
|
|
| 34463R.S |
Genie Excelerator DC Motor Screw Drive Motor Drive Board |
Screw Drive |
|
| 34019R (34019R.S) |
Genie Excelerator DC Motor Screw Drive Controller Board |
Screw Drive |
|
*not all models listed
Copyright © 1999-2004 by Marwest Access Controls Inc.
All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of Marwest Access Controls Inc. |
100% Secure Online Orders