Genie Garage Door Opener UNIVERSAL “Wired” Keypad & Receiver Set model KEP-1

$39.95

Genie Garage Door Opener UNIVERSAL “Wired” Keypad & Receiver KEP-1 (Transformer included)

Out of stock

  • Offers convenient, secure garage entry without using a remote controller or key
  • Installs on ANY garage door opener, no matter what brand
  • Adds security and convenience – Easy installation
  • This is a universal keyless entry that will wire in to the push button terminals on any GDO
  • This keyless entry requires a transformer which is included to power the keyless
  • Offers secure garage entry without using a remote control or key
  • Includes Keypad, Receiver, Wall Transformer, Wiring, Fasteners and Installation Instructions

To reprogram your KEP-1:

  1. Unplug the transformer for 2 minutes, this will reset the board and erase old code.
  2. Place the set / run switch to SET (found inside main interface box)
  3. Chose your pin number (1 to 8 numbers or letters). Do not use the * in your pin. Enter chosen pin.
  4. Press * button once to lock in pin number.
  5. Move the set / run switch to RUN. Programming is complete.

Note: The Genie KEP-1 keypad set will remember a code for 30 seconds and will activate at the touch of any button. This is a “panic” feature for safety in case the unit is activated and someone (or something) gets in the path of the door.

KEP-1 Installation and Operating Instructions