Dual Frequency Version Works With 390 or 315Mhz Genie Intellicode Series II and Overhead Doors Code Dodger garage door openers manufactured from 1997 to present.
The Genie model GICTD-1 is a new style one-button gate/garage door remote control compatible with the Genie Intellicode Series II and Overhead Doors Code Dodger garage door openers and receivers. This remote control is a dual frequency version allowing it to work with all Genie Intellicode Series II or Overhead Doors Code Dodger Garage door openers models manufactured since 1997 and can operate on the newer 315Mhz or the older 390Mhz frequency. The compact size and flexibility of this remote allows it to be used as both a visor model by slipping it into the cradle and using the visor clip or as a keychain remote using the easy disconnect keychain ring included. This item is brand new and includes full manufactures warranty. Packaging can vary depending on stock on hand and is typically from dealer bulk pack were remote comes is in a plastic bag but occasionally could be in retail blister pack. Contents include remote, visor cradle, visor clip, disconnect keychain, battery (installed) and programming instructions.
The Genie GICTD-1 remote is compatible with the following models to control one device on door openers manufactured since 1997: GIT90-1, GIT90-2, GIT90-3, GIC90-1, GIC90-2, GIC90-3, GIT-1, GIT-2, GIT-3, GIC-1, GIC-2, GIC-3, GMI-2BL, GMI-3BL,
ACSCTG type 1, 2 or 3, ACSCTO type 1, 2 or 3, OCDT-1, OCDT-2, OCTD-3
Not all compatible models may be listed.
Will not work on Genie doors or gates that use the older code switch type remotes or Intellicode models manufactured prior to 1997.
- Controls one Genie Intellicode or OHD Code Dodger type door/gate
- Works with all Genie Intellicode Series II and Code Dodger receivers or garage door openers manufactured since 1997
- Compact design allows for use as visor or keychain remote
- Test/operate LED
- Visor mounting clip and holding cradle included
- Pull-apart keychain ring included
- Side mounted frequency selector switch
Power: One 3V lithium CR2032 battery (included)
Frequency: 315 or 390 MHz (selected by side switch)
Codes: Intellicode code rotating system
Dimensions: 2.75 x 1.75 x 0.75 inches